Aquatic Feed Pellet Mill Is The Best Choice for Shrimp Farming

Shrimps have balanced nutrition, soft meat, and are easy to digest, so they are beneficial to asthenic. The high content of magnesium can regulate the cardiac activity, protect cardiovascular system, prevent hypertension, and myocardial infarction. Rich phosphorus and calcium are good for children and pregnant women. So shrimp products get more and more popularity. This causes the rapid development of intensive shrimp farming. Feed pellet costs of shrimps account for a large proportion of shrimp farming. So shrimp breeders seek top quality feeds. Researches show that feed pellets made by aquatic feed pellet mill are widely used around the world.

About Aquatic Feed Pellets

Aquatic feed pellets are produced based on the shrimps’ features and nutrition needs, mix raw materials evenly according to a certain proportion, then form the final pellets through an aquatic fish feed pellet machine. Aquatic feed pellets are especially made according to shrimps’ physiological character so they are the best choice for shrimp farming.

Aquatic Feed Pellets Benefits

Good water durability

Shrimps are slow eaters. Their habit of slowly nibbling feeds needs aquatic feed pellets to keep the shape in water for a long time. Aquatic feed pellets have a smooth surface and hard texture so they can maintain the shape in the water.

2. Balanced nutrition

Aquatic feed pellets are made based on the nutrition needs of shrimps and adopt scientific formula so they have good palatability and balanced nutrition. This can ensure shrimps are not picky about feed, feed pellets are easy to digest absorb and have a high utilization rate.

3. Improve water quality

Now feed accumulation is the main factor causing water contamination. The frequent feeding is easy to cause feed residue and feed accumulation. Shrimps should be fed two to five times each day. If shrimps are fed by feed pellets which have good water durability, then pellets feed will not decay before shrimps eat them. And the feed pellets quantity is easy to control so as not to cause feed accumulation and pollute the water quality.

Aquatic feed pellets are exactly suitable for shrimp farming. Choosing the proper and top quality feed pellet mill to make feed pellets is very important. Fusmar Machinery can supply high-quality aquatic feed pellet machine for customers. The feed pellet mill equipped with conditioners that can make sure feed pellets are fully cooked and have good quality. Aquatic feed pellets produced by our feed pellet mill have a smooth surface, good water durability, and hard texture which are suitable for shrimp farming.

All we do is to supply the best quality fish feed production line equipment for our customers. If you have any questions or you are interested in our feed pellet machine, please contact us when you feel free.

How To Make Straw Into Mechanism Charcoal

The grain has been harvested, and the straw becomes a problem for everyone. To solve this problem, turn the straw becomes a mechanism charcoal, and the straw charcoal machine helps you to complete it. How does the straw charcoal machine turn the straw into mechanism charcoal? This article will introduce this machine in detail.

How To Make Straw Into Mechanism Charcoal

Raw material purchase: Purchased waste straw as raw material for charcoal making machine.
Crusher: Crushing the straw into a particle size of 5mm to 10mm as the raw material.

3. Dryer: Drying the crushed materials, the humidity is 8% to 12%.

4. Conveyor belt: Going through the conveyor belt to transfer the dried materials to the charcoal briquette machine.

5. Charcoal briquette machine: Going through the process of high pressure and high temperature, squeezing the material into a solid rod with a central hole.

6. Carbonization furnace: The solid rods are finished, after undergoing high-temperature retorting of the carbonization furnace to form charcoal.

7. Cooling: After the carbonization of the carbonization furnace, the finished charcoal after cooling is the mechanism charcoal.

8. Packaging machine: The finished charcoal is packaged and can be sold.

An Important Link In The Production Of Mechanism Charcoal

There are four important links in the production of charcoal machine equipment, crushing-drying-charcoal making-carbonization. Only by grasping these four links can we produce high-quality mechanism charcoal.

The most important link in the production of charcoal machine equipment is carbonization. It must be sealed during the carbonization process. If it is not sealed, it cannot be carbonized. In addition, the carbonization time must reach 8 to 12 hours to avoid carbonization incomplete. Charcoal briquette production line equipment not only solves the problem of straw but also makes the mechanism charcoal at a good price.

This is all about straw mechanism charcoal, if you want to build your own machine-made factory or charcoal briquette production line, please contact us. Because we are a professional charcoal briquette machine manufacturer with many years in this industry. We will provide a complete solution to meet your demand.

Made Mechanism Charcoal With Medicinal Residue

Generally, can the medicinal residue do mechanism charcoal? We all know that there are a lot of raw materials that can be used to make mechanism charcoal, such as sawdust, crop straw, tree branches and bark, wood, and waste corner wood from manufacturers. So, can the medicinal residue do mechanism charcoal? The answer is yes.

Now there are many pharmaceutical factories, every day there are a large number of drug residue, if burned will pollute the environment, if dumped into the ground will damage the soil. The disposal of medicinal residue has become difficult for pharmaceutical companies, and the charcoal briquette machine not only dealt with the problem of pharmaceutical residue, but also let the residue into treasure, for pharmaceutical companies to increase revenue.

Made Mechanism Charcoal With Medicinal Residue

In fact, medicine residues, like other raw materials, can be processed into machine-made charcoal through normal processing. The steps of turning medicine residues into mechanism charcoal are the same as other raw materials. They need to be crushed, dried, made into rods, and carbonized.

1. Crushing: Crushing the medicine residue into 2-4mm granules.

2. Drying: The crushed raw materials are dried to a moisture content of 8-12%.

3. Rod making: We can make various types of rods through charcoal making machine according to customer’s requirements, most of them are common diameter 50.

4. Carbonization: Putting the rods into the interior of the carbonization furnace, and finally form machine-made charcoal after high temperature retorting.

An Important Link In The Production Of Charcoal Machine Equipment

At present, there are many customers who come to our factory to purchase charcoal briquette production line equipment to make medicinal residue charcoal. We also eagerly hope that customers will bring medicinal residues to our factory for on-site testing. The charcoal machine equipment is good or not, you will know after a try.

How To Make Chicken Feed Pellet For Layers

Animal performance and feed efficiency benefit from good quality feed pellets. The better the pellet, the better the performance. Reduced waste, less segregation in the animal feed pellets, improved palatability, and shorter eating periods-all of these feed pellet merits are brought by animal feed machine. Fusmar Machinery is a reliable feed pellet mill manufacturer and supplier, which is offering a wide range of feed making equipment including diesel feed equipment, electric feed machinery.

Brief Production Process Of Making Chicken Feed Pellets For Layers

1. Crushing: Crushed raw materials by hammer mill type feed crusher to get fine grinded ingredients.

2. Mixing: All of the ingredients are mixed in a feed pellet mixer for a period of time to get a uniform mix. Then a moist, cohesive mash was obtained at the end of the final mixing.

3. Pelletizing: After mixing, the mash was delivered to the feed pellet machine.

Raw Materials For Making Chicken Feed For Layers

1. Cereals: maize, barley, oat, wheat, triticale, rye, and sorghum.

2. Seed from oleaginous crops: soy, flax, and sunflower.

3. Seed from legumes: broad beans, field bean, and protein pea.

4. Forage: flours of permitted forage essences.

5. Dried beet pulp.

Furthermore, the following substances can be used as appetizers in feed pellets:

1. Carob-bean, up to a maximum of 3%.

2. Molasses, up to a maximum of 3%.

Note: for animals in lactation, dry animals, pregnancy poultry, the maximum daily amount of feed pellets is 2 kg/head/day.

Choosing a suitable feed making equipment and using it properly will significantly improve the quality of the feed. It will soon reflect a benign effect in the production process. If you can further master the technology, you can also greatly reduce the cost of materials, thereby increasing profits.

The pellet making equipment of Fusmar Machinery sells well in domestic and foreign markets and enjoys a high welcome among consumers. With years of hard work, Zhengzhou Fusmar has established a complete and effective service system and built an experienced service team. We will carry out after-sales tracking service for the feed pellet mill equipment sold.

Hope this article can help you to know more about making chicken feed for layers. If you want to build your own feed pellet plant, please contact us.

Fish Farmers Can Produce Fish Feed Pellets Themselves In Nigeria

Nigeria is one of the leading producers of catfish in Africa. But this has been grossly inadequate to meet WHO’s protein requirement recommendation per person. This is made up by imports from Europe, South America, and the Far East. That is unnecessary while using the Minister of agriculture’s assertion that Nigeria’s aquaculture industry has the potential to serve the whole of Africa. Fish feed pellet machine is important to fish farming.

One of the challenges of fish farmers is fish feed pellets in Nigeria and 80 percent of the cost of fish farming is the feed. Although the quality of the imported fish feeds is good, the cost puts them out of reach for most farmers.

If you produce fish feed pellet by yourself, the cost of production will drop by 54 percent because you don’t need to pay for labor, just carry it and feed the fish and you will be using raw materials (chicken waste) that are locally available.

With a hammer mill, mixer, fish feed extruder, and dryer, Fusmar Machinery can supply a simple feed making technology for fish farmers that could cut down the cost of fish production by 80 percent. This could be achieved if every fish farmer gets to know the floating fish feed pellet machine which has developed maturely enough in many other countries.

The fish feed pellet extruder can be divided into two types: dry fish feed extruder and wet fish feed extruder. Dry type fish feed extruder does not need the steam boiler and can process materials into floating pellets directly, so the dry type fish feed pellet machine is cheaper and easier to use and operate. While the wet type is with the conditioner and the steam boiler which can make material ripen and mixed enough, so the fish feed pellet is of better quality and the capacity of the machine is higher than the dry type. Thus the wet type fish feed machine is suitable for large feed pellet factory while the dry type fish feed pellet machine is better and economic for the small and medium size user or factory.

This innovative cost efficient fish feed machine could process various locally sourced and abundant raw materials in Nigeria, like soybeans, groundnut cake, thrash fish etc. Besides, it can produce not only all kinds of floating or sinking aqua feed pellets for fish, eel, shrimp, crab, loach, bullfrog, etc, but also many kinds of pet feeds for cat, dog, and etc. The output can be from 0.06t to 5t per hour for your choice. The resultant effect could be a 54 percent reduction in the cost of catfish and other species of fishes in Nigeria. With this fish feed machine, even those who are just trotting in aquaculture business can afford to make fish feeds themselves.

Hope this article can help you know more about fish farming in Nigeria, if you want to build your own fish feed production line, welcome to visit our website.

Feed Pellets to Your Fish in A Correct Way

Fish pellets come in different sizes to accommodate the size of your fish. There are nursery feeds and grow out diets suitable for a wide range of fish jaws. You can crush the fish feed pellets in large size with a pair of pliers to feed small fingerlings and also can feed larger fish directly, but on the whole it’s necessary to get the pellet to match the size of your fish. Mature fish older than 12 months have no problem feeding on larger sized pellets when they hit the water. Fish feed pellet machine is the indispensable equipment to make fish feed pellets.

How Many Fish Feed Pellets Do You Need

A 10 kilo bag of fish feed pellets will last about 6 months. You can hand feed your fish three times per day just enough feed to disappear within a minute or two. After a while you will get a feel as to how much feed your fish will tolerate. Fish tend to eat more during their preferred climate conditions. Fish like warm tropical conditions and eat more feed over summer than they do in winter. Sometimes due to barometric weather conditions, an approaching storm etc, they will go off their feed for a day or two.

Sinking Or Floating Pellets

When making fish feed pellets you can specify what type of fish pellet you required – floating or sinking. Some fish feed best on sinking pellets. There is no difference between the two types of pellets. The fish feed pellets made by the fish feed extruder is either pressurized more densely, so it causes the pellets to be more compacted which causes them to sink rapidly or they are lightly pressurized in the extruder. So they expand slightly, trap more air, and are termed as floating pellets. Around 10% of floating fish pellets however do tend to sink.

Big Feeds Or Small Feeds

Lighter feeds more frequently throughout the day rather than one big feed once a day. Dumping a heap of fish pellets into your fish tank will cause an ammonia spike that can cause problems if your system is new. Some larger systems use commercial fish feeders that drop a small portion of feed directly into your tank numerous times throughout the day. This is really a great idea to encourage your fish to strike quickly and an easy way to fatten them up quickly if you are unable to fuss around the tank all day. Ad-hoc backyard feeding methods will mean your fish will take longer to grow out. Giving your fish the necessary protein, keeping your fish pellets fresh and frozen at regimented serving portions throughout the day and into the year is a great way to fatten your fish quickly.

If you want to build your own fish feed production line, welcome to visit our Small Fish Feed Pellet Plant.

Animal Feed Machine Feeding Poultry With Feed Pellets

Still buy pellet feed for pig? If you are still buying feed pellets from commercial feed factory or feed shop, then your cost per year for buying feed may be a lot big. Why not choose an animal feed machine to make feed pellets by yourself to save cost. You can find a feed pellet mill to reduce your cost by making your own pellet feed with such a machine using grains like corn powder, wheat, rice husk, wheat straw, vegetables, and so on. Pigs really appreciate variety in their diets.

Tips Of Feeding Time

Pigs are strong and boisterous animals with a well-developed sense of humour, and they will be so eager to get their feed that they may knock you over when they get big enough. If you can, position the feeding trough where you can fill it from the other side of a fence. If not, throw a generous handful of feed into the enclosure as you enter it.

What Raw Materials Can Be Used To Make Feed Pellets

1. Alfalfa meals should be the first one choice for making various feed pellets to meet the high fiber/low carbohydrate needs for poultry – alfalfa is a great ingredient.

2. Crushed oats which are a low – glycemic source of carbohydrates, but you have to remember that if you add oats to a pellet already high in oats, you may push your animal over their carb limit – the oats is a good ingredient.

3. Wheat or corn Germ Meal – Another kind of raw materials with fiber and carbohydrates in a low glycemic form, also a source of fat.

4. Ground barley is similar to oats is a kind of good ingredient.

How Does The Pellet Press Machine Make Pellet

If we would like to make pellets, then we need a feed pelleting machine. Pelleting is a process in which material is turned into small dry pellets. There is a wide range of applications for feed pelleting machine, and it is a commonly utilized industrial process all over the world, seen everywhere from plants which make animal feed to recycling facilities processing materials for reuse. This process is usually accomplished with a specialized machine called pellet press machine, which can operate in a number of different ways, depending on the material being pelletized.

Animal feed is also made by the pellet press machine. This type of feed is produced by grinding constituent ingredients which can be turned into pellets and allowed to dry before packaging. Drying animal feed pellet is lighter and easier to handle, and pelletizing allows companies to create a range of feed blends for different animals, with various additives as needed.

How To Make Feed Pellets At Home

Animal performance and feed efficiency benefit from good quality feed pellets. The better the pellet, the better the performance. Reduced waste, less segregation in the feed, improved palatability, and shorter eating periods-all of these feed pellet merits are brought by feed pellet mill.

Zhengzhou Fusmar Machinery is a reliable feed pellet mill manufacturer and supplier, which is offering a wide range of feed making equipment including diesel feed equipment, electric feed machinery and ring die feed pellet mill. We also supply complete feed pellet production line and have many successful feed mill plant projects around the world. Feel free to contact us if you would like to know more about our equipment.

Raw Materials For Making Feed Pellets

1. Cereals: maize, barley, oat, wheat, triticale, rye, and sorghum.

2. Seed from oleaginous crops: soy, flax, and sunflower.

3. Seed from legumes: broad beans, field bean, and protein pea.

4. Forage: flours of permitted forage essences.

5. Dried beet pulp.

Furthermore, the following substances can be used as appetizers in feed pellets:

1. Carob-bean, up to a maximum of 3%.

2. Molasses, up to a maximum of 3%.

Note: for animals in lactation, dry animals, and heifers from the sixth month of pregnancy, the maximum daily amount of feed pellets is 2 kg/head/day.

Equipment For Making Feed Pellets

Machinery and equipment to make feed pellet required in the feed pellet production line are as following:

1.Tank (or other containers) for raw and auxiliary materials storage.

2. The feed hammer mill (feed pellet grinder) for grinding the raw materials to feed powder.

3. Feed pellet blender (feed pellet mixing machine) used to mix powdered materials to improve the uniformity of the ingredients.

4. Feed pellet mill (feed pelletizer) is the main equipment for making the feed pellets. For animal feed mill, we supply flat die feed pellet mill design better for home use and ring die feed pellet mill design for feed factory. If you plan to buy an animal feed pellet mill, you can tell us your capacity requirement, then our salesman will give you a good recommendation.

6. Feed pellet cooler is used to cool the hot and moisture feed pellets, if your production capacity per day is not so much, you will not need this pellet cooler, just dry the pellets in the sun is OK.

7. Feed pellets screening and grading machine is used to remove the fines and grade the pellets, which is the preparation for packaging.

8. Feed pellet weighing and packaging machine are used to weigh and pack the pellets in the uniformity. If making cattle feed pellets for your own farm, you can choose to store the pellets in a dry container instead of buying a packing machine, while for an automatic feed pellet plant, the weight and packing machine is necessary.

9. Other auxiliary machines (conveyor, lifter, etc.). Usually used in an automatic animal feed pellet production line.

Using A Charcoal Briquette Machine To Make Smokeless Clean Mechanism Charcoal

Machine-made charcoal also called smokeless clean charcoal, it is a kind of carbonaceous stick made of wood chippings extruded through a charcoal briquette making machine. The raw materials of charcoal sticks come from a wide range of sources, like rice husks, peanut shells, cotton shells, corn cobs, corn stalks, and sorghum stalks can all be used as raw materials to produce charcoal sticks. Sawdust, shavings, and bamboo chips as raw materials are the best. Machine-made charcoal has high density, high calorific value, smokeless, tasteless, pollution-free, non-explosive, and inflammable.

The Production Of Smokeless Clean Charcoal

Wood shavings (sawdust), tree branches, rice husks, bamboo shavings, peanut skins, sunflower seed shells, furfural residues, wine residues, bagasse, corn cobs, coconut shells, coffee shells, and crop straws are used as raw materials. After the dryer drying into the appropriate humidity standard raw materials, then into the charcoal briquette making machine, after the high temperature and high-pressure molding into sticks (semi-finished products). Finally, through the carbonization furnace (carbonization furnace forms a variety of, generally is brick kiln) carbonization into finished mechanism charcoal.

Mechanism Charcoal And Other Charcoal Difference

Environmental protection. Do not cut down trees, using bamboo products waste production, turn waste into treasure. The production of ordinary charcoal to cut down trees, destroy the ecological environment.
High energy. The fixed carbon content is about 80% with a calorific value of 7500-8000kcal/kg, while the fixed ordinary charcoal content is low with a calorific value of 6500kcal/kg.
Cleanliness. Smokeless no charcoal head, combustion no spark. During the combustion, the residual ash naturally falls down and does not float up. Ash content 3% or 6% after combustion residual ashless, flammable.
Shape rules, reasonable structure, easy to use. Uniform length, size, hollow or solid construction, suitable for combustion and use.
Water content is low, within 5%. Ordinary charcoal has large water content.
The product contains no chemical substances, no toxic odor, no pollution, long burning time, and other advantages.

Classification Of Mechanism Charcoal

Low-temperature Charcoal

Low-temperature charcoal is loose in texture, low in carbon content and poor in mechanical strength. It is used in industry and agriculture (such as silicon smelting plant), heating, and hot pot.

Medium-temperature Charcoal

The texture of medium-temperature charcoal is closer than that of low-temperature charcoal, and the carbon content is slightly higher than that of low-temperature charcoal. It is mainly used for barbecue, in addition to, industrial and agricultural, heating, and hot pot.

High–temperature Charcoal

High-temperature high-quality charcoal is hard and solid, heavy to handle in hand. It can sink in water, can make steel sound when struck, has high carbon content, low volatile content and ash content, no flame when burning. The burn resistance is three times that of low-temperature charcoal and two times that of medium-temperature charcoal. It is suitable for all occasions with charcoal, especially for high-grade barbecue and export.

Market Prospect

The mechanism charcoal market is broad. Catering (barbecue, hot pot, etc.) is used as charcoal for the barbecue. The mechanism charcoal density is more than three times that of ordinary charcoal, burning smokeless. Industrially, mechanical charcoal is used in the production of carbon disulfide and steel smelting. It is also used as a supplementary fuel for boilers. Its density is similar to that of coal, with a calorific value of 5,500-7,000 kcal /KG, but its ash content is significantly lower than that of coal.

The use of mechanism charcoal is broad, and the raw materials are relatively wide. The market sales are also dominated by large cities, and the demand is quite large. The investment threshold of mechanism charcoal is low, but the technical requirements are relatively high. In the initial stage of production, if the technical level does not meet the requirements, the loss is also possible.

Hope this article can help you to know more about mechanism charcoal with the charcoal briquette machine. If you want to build a charcoal briquette plant, please contact us.

Knowledge Of Buying Animal Feed Pellet Mill

Then how much do you know when you decide to buy an animal feed pellet mill? many people who have little experience in making feed pellets, different people have different questions about pellet mill for making feed pellets, some customers once consulted us such questions which are maybe you will have:

Is there any advantage the diesel or electrical one has except that the diesel one is lighter? the advantage between diesel and electricity, is that easy and convenient to move. Besides, it’s good for the area lacking electricity or the area of high electricity prices.
Are the feed pellets produced small? do you have some clients making pellets using the animal feed machine? I mentioned it is primarily for animals? The pellets produces can be 2.5–8mm, choosing according to your requirement.
Are there some parts that wear out frequently which I would need to order together with the machine? The main parts are the roller and die, they are can be about 6-8 months on the condition of continuously working.

The mechanical equipment of Fusmar sells well in domestic and foreign markets and enjoys a high welcome among consumers. With years of hard work, Zhengzhou Fusmar has established a complete and effective service system and built an experienced service team. We will carry out an after-sales tracking service for the feed pellet mill equipment sold.

Hope this article can help you know more about animal feed machine, if you want to build your own feed pellet production line, please visit our 500KG Animal Feed Pellet Plant.