We Have Counter Flow Cooler Feed Cooling Machine On Sale

Cooling machine achieves refrigeration by vapor compression or absorption cycles. These liquids can flow through the heat exchanger to cool the air or equipment. The vapor compression cooler consists of four main components of a vapor compression refrigeration cycle (compressor, evaporator, condenser, part metering device). The machine can realize different refrigerants, the refrigerant used in the absorption refrigerator and the benign silica gel used in the city as a desiccant.

Zhengzhou Fusmar Machinery is a professional cooling machine manufacturer, this article we will introduce SZLH series counter flow cooler in detail.

Application Of Counter Flow Cooler

Mainly applicable to a variety of granular material cooling.

Livestock Poultry Feed Production Line

10-80t/h pig feed production line
10-20t/h suckling pig feed production line
10-80t/h chicken feed production line
10-80t/h duck feed, goose feed production line
10-60t/h rabbit feed production line

Product Technical Parameters

Model	SKLN1.5	SKLN2.5	SKLN4	SKLN6	SKLN8
Cooling Volume (m³)	1.5	2.5	4	6	8
Product Capacity (T/H)	3	5	10	15	20
Cooling Time (Min)	Not less than 6 to 10
Material Temperature after Cooling	Less than 3 to 5℃ higher of the room temperature
Mating Power (KW)	0.75	1.1	1.5	1.5	1.5
Air Shutter Power (KW)	1.1	1.1	1.1	1.1	1.1

parameter

Main Product Characteristics

This machine adopts the counter flow cooling principle to cool down pellets with high temperature and high moisture content. This cooling method can avoid the sudden cooling because of the direct contact between the cold air and materials, which will prevent the surface cracking of the pellets.
The latest design of octagonal cooling chamber has no dead angle.
Feeding via airlock has large wind area wind area and remarkable cooling effect.
The reciprocating slide valve discharging mecha nism is stable and reliable in working and guarantee less residue.
Low energy consumption and easy operation.
The temperature of cooled products is not 3℃ to 5℃ higher than room temperature, which is suitable for cooling granule materials.
We also provide cooler with panel turnover discharging system for your choice. The hydraulic driven discharging mechanism is usually used for cooling the extruded of expanded materials.

Counter Flow Cooler Working Principle

The dried wet material is sent to the hopper by a belt conveyor or a bucket elevator, and then fed through the hopper through the feeding pipe into the feeding end. The slope of the feeding pipe is greater than the natural inclination of the material, so that the material flows smoothly into the cooler. The cooler cylinder is a rotating cylinder that is slightly inclined to the horizontal.

The material is added from the higher end, the heat carrier is discharged from the lower end, and is in counter contact with the material. The heat carrier and the material are simultaneously flowed into the cylinder. As the rotating material of the cylinder is moved by gravity to the lower end. During the forward movement of the wet material in the cylinder body, the heat supply of the heat carrier is directly or indirectly obtained. So that the hot material is cooled, and then sent out at the discharge end through a belt conveyor or a screw conveyor.

A copy board is arranged on the inner wall of the cylinder, and its function is to copy and sprinkle the material, so that the contact surface of the material and the air flow is increased. And then increase the cooling rate and promote the advancement of the material. The cooling body is generally classified into cold air or the like. After the heat carrier passes through the cooler, a cyclone is generally required to trap the material contained in the gas. If you want to further reduce the dust content of the exhaust gas, you should also discharge it after passing the bag filter or the wet dust collector.

Advantages Of Counter Flow Pellet Cooler

1. Counter flow cooler has low air consumption.

2. The temperature difference between pellets and cold air decrease to the minute.

3. The discharging system of counter flow cooler ensure pellets distribute uniform.

Our Services

  Warranty time: one year, from the date which the product is qualified commissioning. Any damage except the wrong operation during warranty period is repaired freely. But the travel and hotel expenses should be counted on the buyer.
2.  Commissioning services: the product’s installation and commissioning at the demand side, our engineers will not leave there until get your agreement.
3.  Training services: our engineers will train your staff to operate it during the period of installation and commissioning, and they will not leave there until your staff can operate it properly and normally.
4.  Maintenance services: any malfunction happened, once you enquiry us, we will reply you within 48 hours except the special reasons.
5.  Lifelong services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.

Zhengzhou Fusmar Machinery as a professional cooling machine manufacturer, we not only provide a single machine, but also provide a complete feed pellet production line. With years of experience in production and sales, we offer machines that are welcomed by customers.

Feed Processing Equipment Accelerates The Development Of The Feed Industry

The feed industry is an important industry that supports the farming of livestock and poultry, and it is also an industry that measures the modernization level of animal husbandry. At present, poultry and animals are basically fed with feed pellets, and feed processing equipment has specialized feed machinery and equipment.

Feed Processing Equipment Accelerates The Development Of The Feed Industry

Improve the level of feed processing equipment. With the specialization, large-scale, automation, intelligence, high efficiency and low consumption, environmental protection, safety and health, it promotes the upgrading of feed processing equipment. Improve the reliability, service life, intelligence, and self-cleaning level of key equipment, such as raw material receiving, crushing, quenching and tempering, pelletization, cooling, drying, screening, packaging, stacking, and so on. Organically combine feed processing technology with animal nutrition, and according to the requirements of subdivided species, subdivision stages, and fine breeding, establish a suitable processing technology and quality safety index system. Promoting the subdivision processing of feed products.

The Reason For Choosing The Feed Pellet Machine Equipment To Process Feed

Feeds processed with feed pellet production line machinery are very comprehensive in their nutritional formula, which can prevent animals from picky eating. Because the feed is basically granular, it can maintain uniformity in each process, which can reduce unnecessary losses and save transportation costs.

During feed pellet processing, a series of reactions occur in the feed due to factors such as moisture, temperature, and pressure, which help digestion. In addition, the fluidity of pellet feed is good, and it rarely causes sticking, which is one of the reasons that attract customers.

The feed processed by feed pellet machine is not as easy to be classified as powder, so it is not easy to dust, and the environmental pollution is relatively reduced. Which is in line with the concept of environmentally friendly production. On the whole, feed machinery is an ideal feed processing equipment and should be used well.

Hope this article can help you know more feed processing machinery, if you want to build your own feed pellet production line, please contact us. Welcome to click our website and inquiry about the machine details.

Things You Need To Know Installation And Commissioning Of Feed Bagging Machine

The feed packaging scale is a specific application of electronic weighing technology. It is a weighing packaging device that quantitatively dispenses bulk materials and powders according to the preset quantitative value of the system. It used as a production process. One of the main links has been widely used in the chemical industry, fertilizer industry, food, and other industries. Zhengzhou Fusmar Machinery is a professional feed bagging machine manufacturer, this article will introduce the installation and commissioning of feed bagging machine in detail.

Install The Discharge Transition Bucket And The Pocket Bucket

The pocket sensor switch should mount on the left or right side according to the operator’s habits.

Install The Weighing Hopper And Senso

Do not pass the welder current through the load cell.

2. Do not allow the external force to impact the sensor.

3. The feed packaging scale sensor must fix firmly, and the rotation between the universal joint and the U-shaped fork flexible and forceless, and the nuts are tightened. So that the universal joint no longer misaligned. If the joint misaligned, it may cause irregular changes in system zero. In addition, the bucket scale shall fix on the scale bucket by the discharge valve of the scale bucket. So that the scale bucket connected with only one compressed air pipe outside, and the gas pipe not affected by the external force during installation, and the gas pipe connected to the solenoid valve not touched. Touch external objects to avoid affecting the weighing accuracy.

4. There should a margin between the sensor connection and the external fixed point. Do not open it too tightly to avoid affecting the free state of the scale.

5. The whole weighing part must fix on a platform with good stability and good rigidity, and should not shake by the influence of external force.

Install The Feeding Mechanism

1. In order to improve the weighing accuracy, the position of the feed packing scale should keep away from the vibration source as far as possible. The inlet of the feeding mechanism must connect to the outlet of the finished product by soft connection. The height of the soft connection should not exceed 5 cm.

2. The finished product warehouse above the feeding mechanism should ensure sufficient material supply during normal operation. And the oblique connection with the feeding mechanism to reduce the front pressure of the material to the feeding mechanism, and avoid material collapse and impact precision of weighing.

Electrical Installation Of The Feed Bagging Machine

1. The control box should install in a position that is easy to operate and easy to observe near the pocket.

2. A galvanized iron pipe or plastic-coated metal hose connected the power and control line between the control box and each equipment.

3. Ground the control box and motor.

Mechanism Debugging Of The Feed Bagging Machine

1. Press the fast feed and slow feed buttons respectively to see if the fast and slow feeders are moving. The auger type and the belt type feeding mechanism look at the forward and reverse of the feeder. And observe whether the steering and the forward rotation indicator consistent. If the reverse rotation performed, the three-phase lines of the motor can exchange alternately. If the steering is correct, it can rotate continuously for a period of time to see if it is working properly.

2. Touch the pocket sensor switch once to see if the cylinder of the solenoid valve of the bag is moving. Touching the bag switch again, the bag mechanism opened under the action of the solenoid valve and the cylinder.

3. There is a bucket type retry scale door (discharge door) solenoid valve action. Press to open the door, press again to close the door, to see if the cylinder of the scale door valve solenoid valve can drive the scale door to have the corresponding action. Whether the action direction meets the requirements.

Speed and accuracy adjustments are the most common problems in all failures of the auto packing machine. In the packaging of the finished product, it is necessary to ensure the speed of the packaging and ensure the accuracy of the packaging. Which requires setting the optimal value in the parameters of the instrument. The specific adjustment method must consult professional technician.

Zhengzhou Fusmar Machinery specializes in the production of feed pellet machine, feed hammer mill, feed mixing machine, feed cooling machine, feed packing machine, and other feed machinery.

How To Make Poultry Feed Pellet We Have Animal Feed Mill On Sale

Animal feed pellet is use mixed feed or single feed (forage, cake, etc.) into granular feed by animal feed mill. It’s usually cylindrical, there are different sizes depending on the type of feeding poultry. Zhengzhou Fusmar Machinery is a professional animal feed mill manufacturer.

How To Make Feed Pellets

Zhengzhou Fusmar Machinery provides a full set of animal feed production line, the following to introduce the animal feed production method.

1. Accurate formula and precise ingredients. According to the nutritional needs of poultry, feed formula should be reasonably prepared. In the process, strictly according to the amount of various raw materials added for accurate weighing.

2. Pay attention to the pellet size. The main purpose of crushing all kinds of seed and block feeds such as corn and bean cakes in the formula is to reduce the chewing of poultry, increase the contact surface between feed and digestive fluid, and thus improve the digestibility of feed nutrients. Chicken feed grinding is generally required through the diameter of 1 mm below the screen.

3. Mix well. Mixing the pulverized raw materials and other raw materials in the formula according to the proportion of the formula into the mixer, and mix each batch for 3 ~ 5 minutes. The mixture is now a powder feed. After grinding dry powder material can not be directly fed poultry, because dry powder material palatability is poor, and the loss of waste is serious, generally dry powder material mixed with water after wet feed. Add water to stir should grasp the water, water is not too big, not too small. General dry humidity control in a grasp with the hand can pinch into a group, let go after loose and spread out is advisable. Wet material should mix and feed immediately, otherwise easy to cause corruption and deterioration.

4. Shape properly. After mixing the powder feed, through the comprehensive treatment of the steam, heat and pressure of the powder feed into granule material by poultry feed production machines, starch gelatinization and curing. This can improve the palatability of feed, improve nutrient digestibility, avoid picky eating of poultry, increase intake, particle feed diameter is generally 3 ~ 5 mm.

5. Maintain the relative stability of feed. Pay attention to the ratio of protein to energy to ensure the intake of protein and keep the crude fiber content in the feed below 5%. The relative stability of feed should be maintained. If changes are necessary, they should be made gradually, otherwise they will affect the growth of poultry.

How To Make Green Plant Feed

There are abundant green plant feed resources, including herbage, leaf, vegetable and crop straw. It has many advantages such as low cost, high benefit, low investment, quick effect, wide source, easy processing, good nutrition and grain saving, etc. This paper introduces the production and feeding methods of several green plant feeds:

1. Basic stock for livestock. Take corn straw, straw, peanut vine, sweet potato vine as the main raw materials to make this kind of green plant feed. This kind of feed is the basic material of herbivorous animals, mainly used for raising cows, beef cattle and herbivorous fish. Feed can add 40%~60% of the total amount of feed, or all feed to feed. Adding about 40% corn straw meal or straw meal to fish feed can reduce the feed cost by half.

2. Feed additives. Take the fresh and tender corn straw, ryegrass, alfalfa, peanut leaves, sweet potato leaves, jatropha leaves as the main raw materials. This kind of green plant feed belongs to the pollution-free type additive, because it is processed when fresh and tender, it is rich in nutrition, and can replace some additives in the feed, which has a good effect on promoting the development of livestock and poultry.

Feed livestock, poultry and fish at the proportion of 50% of the total feed, the price is less than half that of corn, but the content of amino acid, vitamin and crude protein is 1~3 times higher than corn, the average grain saving is 40%~50%, and the feeding cost is reduced by 30%.

In order to meet the requirement of customers, Zhengzhou Fusmar Machinery not only provides a full set of animal feed pellet production line, but also provides a single machine in the production process.

The Reason That The Finished Product Appears Rough In The Organic Fertilizer Granulator Production Line

Organic fertilizer granulator production line is to make the fertilizer into the user needs the granule, then convenient for later use or sales.

Zhengzhou Fusmar is a professional fertilizer granulator machine manufacturer, welcome to our website and inquiry for machine details.

The Reason That The Finished Product Appears Rough In The Organic Fertilizer Granulator Production Line

The service life of an organic fertilizer granulator depends on the daily maintenance of the equipment. It should note that with the extension of the use time, the components of the organic fertilizer granulator will wear out. If it not processed in time, the particle size of the finished product will become larger, thicker, and unattractive. We need to replace the lining plate of the organic fertilizer granulator.

Done Well Organic Fertilizer Granulator Daily Maintenance

When replacing the lining plates of the organic fertilizer granulator, we must first pay attention to cleaning the vicinity of the outlet. At the same time, when replacing new wear parts, we must oil the transmission parts to ensure lubricity. Otherwise, new wear parts must also fix in place during installation to avoid unnecessary losses due to loosening.

If the daily maintenance of the organic fertilizer granulator done well, the service life of the granulator can greatly extend. Cherish the equipment during use, do not let the equipment run idle, pay attention to the change in equipment temperature and not overload operation. If there is noise, stop the operation in time, check the fault, and then eliminate the fault before use.

Using Organic Fertilizer Equipment To Make Organic Fertilizer

Plants using chemical fertilizers in agriculture are susceptible to disease and must kill through pesticides. In the long run, this approach destroys biodiversity, damages soil, pollutes the environment in which humans live. Otherwise, it directly endangers human health and affects the sustainable development of agriculture. Eliminating the use of fertilizers and pesticides is one of the goals of modern organic agriculture. Therefore, the use of organic fertilizers is increasing because organic fertilizers do not pollute the environment.

Hope this article can help you know more organic fertilizer, if you want to build your own organic fertilizer production line, please contact us.

We Have Biaxial Mixing Machine Fertilizer Mixer Machine On Sale

The biaxial mixer rotated through two sets of shafts with spiral blades. Spraying and mixing the powdered material with water to make the powdery materials reach controllable humidity. This equipment is mainly suitable for the humidification and mixing of raw materials in the fertilizer industry. Allow the material to stir well. And compatible with the delivery function.

Zhengzhou Fusmar Machinery is a professional fertilizer mixing machine manufacturer, this article will introduce this machine in detail.

Introduction Of The Biaxial Mixing Machine

The biaxial mixer uses the synchronous rotation of two symmetrical spiral shafts. Add water and stir while conveying dry powder and other powdery materials, and evenly humidify the powdery material. So that the humidified material does not take dry ash and does not ooze water droplets. The purpose is to facilitate the transportation of humidified ash loading vehicles or transfer to other conveying equipment.

Use And Characteristics

The biaxial mixer used in the pre-watering granulation process. The whole mixing divided into three areas of atomization area, the mixing area, and the discharge area. The hard gold head welded on the stirring blade, which has good wear resistance and long service life.

The Main Technical Parameters

Model	Speed Reducer(JZQ)	Motor(Y Series)	Spindle Speed(Y/MM)	Rotary Diameter(MM)	Capacity(T/H)	Weight(KG)
ZYQ-QZ 400	400-1V-2	Y160M-4-11	52	400	20	2350
ZYQ-QZ 450	500-1V-2	Y160L-4-15	52	450	25	2620
ZYQ-QZ 500	500-1V-2	Y180M-4-18.5	53	500	30	2980
ZYQ-QZ 550	650-1V-2	Y180L-4-22	53	550	35	3450
ZYQ-QZ 600	650-1V-2	Y200L-4-30	52	600	40	3850
ZYQ-QZ 650	750-1V-2	Y225S-4-37	52	650	45	4260

parameter

Equipment Structure Of The Fertilizer Mixing Machine

The biaxial mixer mainly composed of the following parts:

1. Main motor and cycloidal pinwheel reducer (transmission machinery).

2. For the meshing transmission gear.

3. Front and rear thrust bearing assemblies.

4. Main and passive spiral mixing shaft.

5. The tank body.

6. Humidifier.

7. In and out of the material.

8. The base frame.

Structural Performance Of The Machine

1. The shell mainly composed of sheet metal and section steel. It welded and formed in the factory and assembled with other components. It is the support of the biaxial mixer. The shell tightly sealed and there will be no fly ash and ash leakage.

2. The water conditioning and humidity control pipe mainly composed of a nozzle, a joint, and a nozzle. The nozzle adopts a stainless steel atomizing cone nozzle, which arranged above the inside of the mixer casing and arranged axially along the direction of the screw axis formed a water curtain to facilitate humidification and agitation of the material. The nozzle structure is simple, easy to replace, stainless steel material, anti-corrosion and durable. The moisture content of the wet ash can be adjusted through operating a manual regulating valve on the water supply line.

3. The cover plate mainly includes a left cover, a middle cover, a right cover, a hole cover, and a manhole cover. There are six manholes on both sides of the biaxial mixer to facilitate the operator’s usual inspection and maintenance. A biaxial mixing machine used for the pneumatic conveying end.

Working Principle Of The Biaxial Mixing Machine

When the feeder uniformly introduced the dry powdery material through the feeding port. The power transmission mechanism drives the spiral main shaft with the plurality of sets of blades to rotate, and the passive screw shaft and the main shaft driven to the constant speed through the meshing transmission gear. So that the material stirred and pushed to the tank humidification section. After the material pushed to the humidification section, the humidifier automatically wets the material, and then the mixture fully stirred after the tank body stirred. After the humidity discharged from the discharge port, it will enter the next process.

Choosing a suitable fertilizer mixer and using it properly will significantly improve the quality of the mix. It will soon reflect a benign effect in the production process. If you can further master the technology of self-mixing, you can also greatly reduce the cost of materials, thereby increasing profits.

Using A Charcoal Briquette Extruder Machine To Make New Energy Mechanism Charcoal

The new energy mechanism charcoal is a kind of charcoal rod that extruded from wood chips through a charcoal briquette extruder machine. It is an internationally recognized green product.

Zhengzhou Fusmar is a professional briquette making machine manufacturer, this article will introduce new energy mechanism charcoal in detail.

Wide Source Of Raw Materials

Carbon rods come from a wide range of sources. Rice husks, peanut husks, cotton husks, corn cobs, corn stalks, sawdust, shavings, pine husks, coconut shells, and so on. Which can be used as raw materials to produce mechanism charcoal. It is best to use sawdust, shavings and bamboo chips. It has a high density, high calorific value, smokeless, odorless, non-polluting, non-explosive, and flammable. Mechanism charcoal is not only effective but also can solve a lot of our daily life waste. The slag produced by the edible fungi that we often eat can also be recycled into mechanism charcoal. The appearance of mechanism charcoal technology can effectively improve the comprehensive economic benefits, environmental benefits, and social benefits.

Crushing Of Raw Materials

Mechanism charcoal can effectively realize the recycling and reuse of resources, and the main charcoal briquette production line equipment for making mechanism charcoal in the early stage is the grinder machine. The grinder machine has many types and categories, here recommended Fusmar grinder machine. This equipment can not only process corn cob, corn stalk, corn leaf, sorghum stalk, and other materials, but also can be used for cutting bamboo, straw, and other fibrous materials. Moreover, it has a good crushing effect, high yield, low energy consumption, and even fine crushing. Moreover, when using the device, the noise is low, pollution-free, easy to operate, and easy to maintain.

Barbecue Mechanism Charcoal

People who often eat barbecues have heard of charcoal. They think that the mechanism charcoal roasted meat does not have the taste of traditional charcoal-grilled meat, but the mechanism charcoal is a world-recognized green product. High density, high calorific value, smokeless, odorless, non-polluting, flammable, and so on.

The Difference Between Mechanism Charcoal And Other Charcoal

1. Environmental protection: Do not cut down trees, use bamboo and wood products waste production, turn waste into treasure. The production of ordinary charcoal requires cutting down trees and destroying the ecological environment.

2. High energy: Fixed carbon content of about 80%, the calorific value of 7500-8000kcal / kg, while ordinary charcoal fixed carbon content is low, the calorific value of about 6500kcal / kg.

3. Clean and hygienic: Smokeless, charcoal-free, burning without sparks. The residual ash naturally falls during the burning, does not float up. Ash content of 3% or 6%, less ash after combustion, flammable

4. The shape is regular, the structure is reasonable, and the use is convenient: There are a uniform length and size, hollow or solid structure, which is favorable for burning and use.

5. The water content is low, within 5%: Ordinary charcoal has large water content.

6. The product contains no chemicals, no toxicity, no odor, no pollution, and long burning time.

Hope this article can help you know more mechanism charcoal, if you want to build your own charcoal briquette production line, please contact us.

How To Ensure The Hardness Of The Pellets During The Straw Pellet Machine Production Process

Straw pellet machine is a kind of equipment that can transform some agricultural waste into new fuel or feed pellets, which not only solves the problem of agricultural residues but also provides a new development direction for new energy. However, in the process of using the straw pellet machine, we have requirements on the quality of the straw pellets made through this machine.

Hope this article can help you know more about the quality of feed pellets, if you want to build your own feed pellet production line, please contact us.

How To Ensure The Hardness Of The Pellets During The Straw Pellet Machine Production Process

We all know that when the feed processing machinery is in production, it is often affected by many factors. Which will jointly determine the quality of the products produced. In the production of straw pellet machines, since hardness is an important indicator of the quality of straw pellets, we generally require that the hardness of the pellets meet a standard. So, what factors will restrict the hardness of straw pellets?

Straw Pellet Machine Production Process

Therefore, we must start with the production process. In the production of straw granulators, there is a relatively important process, which is steam conditioning. The effect of steam conditioning often determines the internal structure and appearance quality of the pellets. Steam quality and quenching time are two important factors that affect the quenching effect. Because high-quality dry and saturated steam can emit more heat to increase the temperature of the material and make the starch gelatinize. Then the longer the quenching time, the higher the degree of starch gelatinization, which will make the granular structure more compact and firm after molding. Therefore, the better the stability, the higher the hardness.

Raw Materials For Pellets

In addition, it should consider the perspective of raw materials. For example, a single raw material may not have the same hardness as the pellets formed after processing the mixture. Because after mixing the raw materials, it can ensure a more uniform distribution of different pellet sizes, which is more helpful to make the hardness of the straw pellet machine consistent.

Except that, the consideration of moisture is also an aspect. If the moisture content of about 1% to 2% added during the production process of the straw pellet machine, the stability of the pellet feed will significantly improve, so the hardness of the pellets made will also improve. However, when adding water, be sure to control the appropriate amount according to the actual situation.

We Have Vibration Sieve Fertilizer Screening Machine On Sale

The vibration sieve belongs to a new type of high-precision fine-grain screening equipment, which can achieve a satisfactory screening effect on particles and fine powder. Zhengzhou Fusmar Machinery is a professional fertilizer screening machine manufacturer, this article will introduce vibration sieve in detail.

Vibration Sieve Introduction

The sieve body of the vibration sieve divided into a single layer and double layer. The screen mesh made of manganese steel with excellent quality, and the structure is simple and convenient to operate. The screen aperture can select according to user requirements.

The Main Technical Parameters

Model	ZS1×3	ZS1.2×4	ZS1.4×5
Screening Area(㎡)	3	4.8	7
Capacity(t/h)	1-4	3-6	5-10
Motor Power(kw)	1.5	2.2	1.5×2
Vibration Frequency(r/min)	960
Amplitude(mm)	4-6
Outline Dimensions(m³)	3.41.52.7	4.11.63.8	5.41.74.1

parameter

Structure Features Of The Vibration Sieve

The vibration sieve mainly composed of a sieve box, a screen frame, a screen mesh, a vibration motor, a motor pedestal, a vibration-damping spring, a bracket, and so on.

1. Screen box: It made of several kinds of steel plates with different thicknesses and has certain strength and rigidity. It is the main component of the screen machine.

2. Grid: This part made of pine or less deformed wood, mainly used to keep the screen flat, to achieve normal screening. Or use steel grid (stainless steel or carbon steel)

3. Screen net: Stainless steel 304 high-quality screen, anti-rust, and anti-corrosion.

4. Vibration motor: Different models correspond to different powers.

5. Motor pedestal: Install the vibration motor. The connecting screw must tighten before use. In particular, the new sieve machine must tighten repeatedly three days before the trial to avoid loose accidents.

6. Damping spring: Prevents vibration from transmitting to the ground and supports the full weight of the screen box. When installing, the spring must perpendicular to the ground.

7. Bracket: It consists of four pillars and two-channel steels, which support the screen box. When installing, the pillars must perpendicular to the ground, and the channels below the two pillars should parallel to each other.

Working Principle Of The Machine

The power transmitted from the motor through the V-belt to the drive shaft of the exciter and the geared vibrator (speed ratio is 1). So that the three shafts rotate at the same speed, generating exciting force, and the vibration exciter connected with the high-strength bolt of the screen box to generate elliptical motion. The material moves on the screen surface with the high-speed ellipse of the sieve machine, and quickly layered, sieved and forwarded to complete the classification of the material.

The high-quality vibration motor used as the vibration source. When working, the motor eccentric block rotates in the opposite direction. The two motors in the horizontal direction have a combined force of zero and then forming a resultant force perpendicular to the motor shaft direction. The motor shaft and the sieve plate form a certain angle. Together, the material thrown up on the screen while moving forward. The material uniformly fed into the feed port of the sieve machine through the feeder, and then several products produced through the plurality of different aperture screens. At the same time, the unqualified sieve objects and the sieve objects respectively discharged from the respective outlets.

Advantage Of The Vibration Sieve

1. Stable work, long life, and high efficiency.

2. The screen design is unique and the screen change speed is fast.

3. According to the different screening materials, you can flexibly set the screen surface distance or inclination angle.

4. Energy-saving and environmental protection, low energy consumption, and low noise.

5. Multi-layer screening can use to separate materials at multiple levels.

Choosing a suitable fertilizer screening machine and using it properly will significantly improve the quality of the fertilizer. It will soon reflect a benign effect in the production process. If you can further master the technology, you can also greatly reduce the cost of materials, thereby increasing profits.

We Have Feed Mixer Machine On Sale

Using a mixer, many processes get simple, and the mixer used to mix a variety of raw materials. Zhengzhou Fusmar Machinery is a professional feed mixing machine manufacturer, this article will introduce how to choose a feed mixing machine in detail.

The Classification Of Feed Mixing Machine

Generally, feed mixer commonly divided into vertical feed mixer and horizontal feed mixer. The feed mixing machine’s working principle is mixing a variety of feeds evenly, at the same time, the contact surface of the particles increased to promote fusion.

Application Of The Feed Mixing Machine

There are many types of mixer so that they can meet various needs. Such as mixing of various powder particles in the chemical industry, pesticides, medicine, food, petroleum, and other industries. There is also a lot of non-granular agitation, such as the mixing of feed. With the mixer, it saves a lot of manpower and material resources and provides people with a lot of conveniences.

Vertical Feed Mixer Machine

The vertical feed mixer is a non-continuous mixer that is suitable for the mixing of powdered compound feeds. The advantage is that the price of the machine is relatively low, the floor space is small, and the amount of one-time loading is large. The disadvantage is that the supporting power is small, the mixing time is long, the productivity is low, and the residual amount of the material in the cavity is large, the discharging speed is slow and it is not easy to clean.

Horizontal Feed Mixer Machine

Mix materials with good scattering properties, and if necessary, add a small amount of liquid feed. The advantage is that the speed is fast, the time is short, and a variety of feeds can mixer. The disadvantage is that the mechanical footprint is large, and the required supporting power is large.

How To Choose A Feed Mixer Machine

The feed mixer is a processing machinery equipment, which mainly used for mixing during feed processing. Mainly to mix the material evenly, let the material ferment quickly under certain temperature and humidity conditions. Since feed fermentation requires air, humidity, and temperature, all requirements of the feed mixer need to be considered when it customized.

The working principle of the mixer is to use mechanical force and gravity, and then mechanically combine the two or more materials. Moreover, in the process of mixing, it is also possible to increase the surface area of the material contact, which can promote chemical reactions and accelerate physical changes.

Choosing a high-quality feed mixer and using it properly will significantly improve the quality of the mix. It will soon reflect a benign effect in the production process. If you can further master the technology of self-mixing, you can also greatly reduce the cost of materials, thereby increasing profits.